Home > Catalog > Cleaners for Foam Sealant > Touch-N-Seal™ Poly-Clean

Touch-N-Seal™ Poly-Clean

To purchase please contact your local RV Dealer.

Touch-N-Seal™ Poly-Clean is a polyurethane foam cleaner designed to clean wet polyurethane foam from hands, tools & applicators before it hardens and becomes a semi-permanent fixture.

Limpiador de espuma de Poliuretano.  Limpia la espuma húmeda de las manos, las herramientas y los aplicadores.


Print

It comes in 12 oz. (340 g) cans of foam that can be attached directly to the foam applicator gun to flush foam from the barrel. Any excess foam should be cleaned immediately (while wet), as dried foam is extremely difficult to remove and may have to wear off.

Step 1: Remove adapter and attach to top of can for easy use.

Step 2: Spray cleaner directly on top of gun for foam removal.

Step 3: Attach can to gun basket to remove foam from gun barrel.

Part NumberDescriptionPriceUnitQuantity

Seal Design and Dicor Corporation focus on the people and companies that use our products. this includes products, support and services that help improve the production Process.

Contains Dimethyl Ketone and Hydrocarbon Propellant.  Keep away from heat, sparks, flames and static electricity.  Do not smoke.  Use only in a well ventilated area.  Ventilate work area with moving air.  Vapors are heavier than air.  Do not expose to heat or store at temperatures above 120°F (48°C)

Contiene Dimetilcetona e Hidrocarburo como agente implelente.  Mantenga lejos del calor, chispas, llamas o electicidad estática.  No fume.  Use sólo en áreas bien ventiladas.  Ventile la zona de trabajo con aire en movimiento.  Los vapores son más pesados qu el aire.  No exponga al calor ni guarde a temperaturas superiores a 120°F (48°).

Product Product # Per Case
PolyClean 4004512022 12/12oz. cans

Always review and follow the directions provided in your foam kit. The instructions below are a general overview, meant to accompany the reference photos. Ensure you follow all safety precautions including wearing protective eyewear and gloves.

Do Not apply Poly-Clean to furniture or any other finished surface.

Step 1: Remove adapter and attach to top of can for easy use.

Step 2: Spray cleaner directly on top of gun for foam removal.

Step 3: Attach can to gun basket to remove foam from gun barrel.

Handling

Avoid contact with skin, eyes and clothing. Ensure adequate ventilation. Take necessary action to avoid static electricity discharge (which might cause ignition or organic vapors). Keep away form open flames, hot surfaces and sources of ignition. No smoking in area. Avoid ignition of vapors by static electricity discharge. Avoid breathing vapors or mists. Contents under pressure. Do not puncture or incinerate containers. Do not stick pin or any other sharp object into opening of can. Empty container may contain residue, which may form explosive vapors.

Storage

Keep containers tightly closed in a cool, well ventilated place. Keep in properly labeled containers. Keep in an area equipped with sprinklers. Keep out of reach of children. Ideal storage temperature is 16-32º C / 60- 90º F. Storage above 32º C /90º F will reduce the shelf-life. Never keep at temperatures above 48.8º C /120º  F.

Click here for MSDS sheet for Touch-N-Seal Poly Clean.