Home > Catalog > Touch-N-Seal™ Foams > Touch-N-Seal™ Quick Cure Canisters

Touch-N-Seal™ Quick Cure Canisters

To purchase please contact your local RV Dealer.

Seal Design Quick Cure Foam is a high performance, single component, moisture curing and expanding polyurethane sealant. Canister with hose and applicator provides an economical application alternative to two-component foam for big jobs in filling cracks and gaps. Quick Cure Foam is also a Class 1 fire retardant.


Print

  • Quick Cure sealants are available in High Yield (HY) for larger gaps and cracks and in Reduced Expansion (RX) for controlled dispensing rate and less post expansion. Both formulations are tack-free in 30 minutes or less, can be trimmed in one hour, and fully cured in 24 hours. Portable canister application of one component foam economically and conveniently covers extensive sealing needs.
  • Quick Cure seals around plumbing, ventilation outlets, electrical junctions or anywhere you need a fast, air sealing barrier to moisture and drafts. Its closed-cell structure provides permanent insulation solution with RV component materials such as wood, metals and plastics, creating effective barriers to energy loss.
  • Quick Cure is easier to use with its hose and applicator than caulk sealants.
  • It has no ozone depleting chemicals and is Energy Star rated as environmentally friendly.
  • Approved fireblock penetration sealant.
  • Available with 10-foot hose and wand assembly.
Part NumberDescriptionPriceUnitQuantity

Seal Design and Dicor Corporation focus on the people and companies that use our products. This includes products, support and services that help improve the production process.

  • Quick Cure is easier to use with its hose and applicator than caulk sealants.
  • Portable canister application of one component foam economically and conveniently covers extensive sealing needs.
  • Available with 10-foot hose and wand assembly.
  • Shelf life of 12 months.

Applicable Standards

ASTM E-96 Water Vapor Transmission

ASTM C-273 Shear Strength

ASTM C-273 Shear Strain

ASTM C-518 R-Value

ASTM E-814 Firestop Penetration

ASTM C-1536 Yield

ASTM D-1621 Compressive Strength

ASTM D-1622 Density

ASTM D-1623 Tensile Strength

ASTM D-2856 Closed Cell Content

UL 1715 Fire Test

UPB26-3 Corner Room Fire Test

Approvals/Certifications

International Building Code

International Residential Code

BOCA National Building Code

1999 Standard Building Code

1997 Standard Building Code

ICC-Evaluation Services

California Bureau of Home Furnishings and Insulation

Underwriters Laboratories Classified Caulking & Sealants

Limitations

Do not expose to temperatures above 240F (116°C), open flames or sparks

Not for exposure to ultraviolet light

Chemicals must be 50-100F (10-38C) prior to application

Do not store in temperatures above 120F (49°C)

Always refer to local building code regulations

Do not leave product exposed; cover with approved facings

Propellant in 12 & 24 ounce straw foam is flammable; read MSDS and do not use near high heat, sparks or open flame

Not a fire stop material

Physical/Chemical Properties

Click here for table. Test data available upon request.

Product Item # Weight (lbs/kg)
Quick Cure HY Foam Complete 4004518100 10 pounds (4.54 kg)
Quick Cure HY Foam Cylinder Only 4004518101 10 pounds (4.54 kg)
Quick Cure HY Foam Complete 4004518160 16 pounds (7.26 kg)
Quick Cure HY Foam Cylinder Only 4004518161 16 pounds (7.26 kg)
Quick Cure RX Foam Complete 4004510950 10 pounds (4.54 kg)
Quick Cure RX Foam Cylinder Only 4004510951 10 pounds (4.54 kg)
Quick Cure RX Foam Complete 4004516900 16 pounds (7.26 kg)
Quick Cure RX Foam Cylinder Only 4004516901 16 pounds (7.26 kg)

Always refer to local building codes prior to application of Touch-N-Seal® foam sealants.

The Touch-N-Seal Quick Cure one-component expanding foam sealant can be applied to and will adhere to almost any traditional construct surfaces including wood, masonry, insulating foam boards, metal, plastics and sheetrock. Surfaces to receive Touch-N-Seal foam sealants must be dry, clean and free of dust, dirt, grease and other substances that may inhibit proper adhesion. For best results apply Touch-N-Seal Quick Cure expanding foam sealant when surface and ambient temperatures are between 60°-100° F (16°-38° C). Temperature of chemical contents must be between 50°-100° F (10°-38° C) before dispensing. Use all chemical contents within 30 days of initial dispensing.

Always wear proper personal protective equipment, including gloves, clothing and eyewear. Use in well-ventilated area.

Shelf Life

12 months in unopened container when stored between 60°-90°F (16°-32°C), in a dry, well-ventilated area.

Storage & Disposal

Keep containers tightly closed in a cool, well-ventilated area. Ideal storage temperature is 60°-90° F (16°-32° C). Storage above 90° F (32° C) will reduce shelf life. Do not store at temperatures greater than 120° F (49° C). Do not expose containers to conditions that may damage, puncture, or burst the containers. Dispose of leftover material/containers in accordance with Federal, state and local regulations. See Material Safety Data Sheet for more information.

Keep out of reach of children.

Click here for MSDS sheet for Touch-N-Seal Quick Cure Foam.